To ensure the safe use of glass-on-chip devices, the following safety issues are emphasized:
1 The staff responsible for the use, maintenance and repair of the company's machine products must be trained to familiarize themselves with the equipment and equipment to understand the dangers that may occur;
2Be familiar with all devices and operating elements and their functions before starting work;
3 When working with the remote control, it is forbidden to stay in the work area;
4 Before taking the glass, confirm that the glass stacking angle conforms to the national standard: as shown in the figure, the angle between the angles is between 84 and 86°. There is a danger of glass crucible overturning when working at a large stacking angle. The boom suction cup does not reach the glass surface condition, which may cause damage to the worm;
5 When the equipment is in the standard glass frame, the larger depth is 350mm. When the non-standard simple glass frame is used, the distance between the glass crucible supports is 2.5m. The glass is stacked in the middle of the support. The stacking angle conforms to the national standard. The glass support base The height does not exceed 0.1 m, and the depth of the take-up is 1 m. If the height of the support is too high and exceeds the specified depth of the piece, there is a risk of equipment damage and personal injury;
6 When not taking the film, try not to turn the flip arm up. If the actual situation is necessary, the angle of the flip should not exceed 90 degrees. Otherwise, there will be damage to the screw rod and the risk of deformation of the roll beam, which will affect the use of the equipment;
7 Do not operate the flip arm when the work on the countertop is carried out, otherwise it will cause glass damage and personal safety accidents;
8 Handheld operator removes the insurance when the device is not in use, so as not to cause misoperation.
3U Chassis is also called a 3u rack-mounted classis. The rack-mounted suits 19-inch rack, U is a unit that represents the height of the outside of the chassis, the height of 1U Server Chassis is 3 time of 44.445mm. Its main role is to place and fix the motherboard, power supply, fan and other accessories to play a supporting and protective role.
3U Chassis
3U Chassis,Network Chassis 3U,3U Chassis Gpu,Computer Case 3U
Dongguan Kaiwang Info Tech Co. Ltd. , https://www.case-kiwacn.com