We know that Snap Buckle and Prong Buckle all need to be equipped with striking tools to complete the installation, but do you know how to install the magnetic buckle? In fact, the problem with the magnetic fastener is that it must be installed halfway through the production process. Half of it must be mounted on the surface of the fabric, half on the lining or all on the lining. However, many times we forget to install it in the middle until the work is completed. Whether it is demolished or not, there is also a patchwork worksheet that can't be attached to the 3rd layer of the clip. How do you encounter these problems?
Now that there is a hand-stitchable magnetic fastener that can basically deal with these problems, what if you only have ordinary magnetic fasteners on hand that do not have such hand sewing?
Let's turn it into a seamable type: cut out four round hard binders that are slightly larger than the magnetic fasteners, and cut two pieces of circular cloth that are larger than the thickness of the binder.
Each side of the cloth is ironed with 2 fusible interlinings on the opposite side of the cloth, and a magnetic fastener gasket is placed on the cloth to mark the two punched holes.
After installing the gasket on the back, press the two feet flat, and then, after stitching along the cloth around the hand stitches for one round, first, the cloth sheet is gathered along the edge of the adhesive liner to gather the folded edge;
Now, you can attach the magnet to the desired position like a patch.
Want to learn more about buttons: Visit http://
Coral Fabric,Coral Fleece,Coral Velvet,Coral Upholstery Fabric
SHAOXING WUYUN TEXTILE CO.,LTD , https://www.kexintextile.com